Rücksendungen & Retouren im Kundenkonto (inkl. DHL und UPS Label)
Beschreibung
Highlights
- Rücksendung in wenigen Klicks aus dem Kundenkonto oder als Gast im Retourenportal mit Bestellnummer und E-Mail, mit Fotos je Produkt
- DHL- und UPS-Retourenlabel gleich beim Absenden, bei DHL mit QR-Code für die Abgabe ohne Drucker
- Jede Rücksendung an einer Stelle im Retourenmanagement: Status mit Schritten, Nachrichten, Prüfen, Erstattung und kostenlose Nachlieferung
- Geprüfte Ware zurück ins Lager oder als B-Ware mit Zustand und eigenem Preis neben der Neuware verkaufen
- Retouren vermeiden: Dashboard, Statistiken, Retourenquote je Produkt und Hinweise in der Kaufbox aus den Gründen
Features
- Kundenkonto „Rücksendungen“ mit Reitern, Anlegen aus der Bestellung mit Menge, Grund, Vorgehensweise, Kommentar und bis zu drei Fotos oder Dateien je Produkt
- Anmeldung zur Bestellung für Gäste im Retourenportal mit Bestellnummer und E-Mail oder Postleitzahl, gebremst wie der Gast-Login von Shopware, eigene SEO-Adresse je Sprache
- Zwei Designs je Verkaufskanal: „Modern“ mit farbigem Kopf und Prozesskette oder „Standard“ wie die übrigen Kontoseiten, Farben aus dem Theme
- DHL und UPS mit Zugangsdaten je Land und Verkaufskanal, ein Label je Paket, kostenlos oder kostenpflichtig, Fristen ab dem Lieferstatus
- Status mit Farbe, Schrittleiste, Text für den Kunden und E-Mail, dazu Gründe, Vorgehensweisen, Zustände und Checkliste im eigenen Menü
- Freigabe (RMA) immer oder nach Bedingungen: Regel, Gründe, Vorgehensweisen, Versandweg oder Rücksendungen des Kunden, Label und Rücksendeschein erst danach
- Prüfen und abhaken je Produkt mit Zustand: zurück ins Lager, als B-Ware, Erstattung mit Beleg oder Gutschrift in der Bestellung, kostenlose Nachlieferung
- Nachrichten mit Dateien zwischen Shop und Kunde, interne Notizen und ein vollständiger Verlauf jeder Rücksendung
- Neun E-Mails aus Flows im Stil von Shopware, eigene Auslöser im Flow Builder, Einrichtungsassistent und Hilfe auf jeder Seite
- Dashboard, Statistiken in sieben Reitern, CSV-Export, Retourenquote an Produkt und Kunde, Produkthinweise mit Vorschlägen
Über die Erweiterung
DEMOSHOP VERFÜGBAR
Teste alle Funktionen vorab im Demoshop: Storefront mit angelegtem Kundenkonto und volle Administration, jede Nacht frisch zurückgesetzt. Zugang über „Zur Demo“ unter den Screenshots.
WEBSEITE
Mehr zu Rücksendungen & Retouren auf shop-retoure.de.
BESCHREIBUNG
Rücksendungen ohne E-Mail-Pingpong: Deine Kunden melden Retouren selbst an, direkt aus der Bestellung im Kundenkonto oder als Gast im Retourenportal deines Shops mit Bestellnummer und E-Mail-Adresse. Sie wählen Produkte, Menge und Grund, hängen Fotos an und bekommen gleich das DHL- oder UPS-Retourenlabel, bei DHL auch als QR-Code für die Abgabe ohne Drucker.
Im Retourenmanagement der Administration hat jede Rücksendung ihre eigene Seite: Status mit Schritten, Nachrichten mit dem Kunden, Prüfen und Abhaken der Produkte, Erstattung mit Beleg, kostenlose Nachlieferung und ein vollständiger Verlauf. Geprüfte Ware geht zurück ins Lager oder als B-Ware wieder in den Verkauf, und Dashboard, Statistiken und Produkthinweise helfen dir, Retouren gar nicht erst entstehen zu lassen.
Das Problem, das du kennst
- Retouren per E-Mail. Der Kunde schreibt, du fragst nach Bestellnummer, Produkt und Grund, schickst ein Label von Hand und suchst später die Mail wieder heraus.
- Kein Überblick. Welche Rücksendung ist angekommen, welche wartet auf eine Antwort, welche ist schon erstattet? Das steht verteilt in Postfach, Notizen und Tabellen.
- Labels kosten Zeit. Jedes Retourenlabel wird im Portal des Versanddienstleisters erstellt, abgetippt und verschickt.
- Erstattung von Hand. Beträge, Versandkosten und Abzüge werden ausgerechnet, ein Beleg fehlt, und der Lagerbestand stimmt danach nicht mehr.
- Rückläufer bleiben liegen. Geöffnete oder leicht beschädigte Ware lässt sich als Neuware nicht mehr verkaufen und landet im Regal.
- Die Ursache bleibt unbekannt. Welches Produkt kommt warum zurück? Ohne Zahlen fällt das erst auf, wenn die Marge schon weg ist.
So löst die Erweiterung das
- Anmelden in wenigen Klicks. Aus der Bestellung im Kundenkonto oder als Gast über die Anmeldung zur Bestellung. Ein Formular für Produkte, Menge, Grund, Vorgehensweise, Kommentar und Fotos, mit Prüfung jeder Angabe.
- Labels automatisch. DHL und UPS mit deinen Zugangsdaten je Land und Verkaufskanal. Das Label entsteht beim Absenden, kostenlos oder kostenpflichtig, und kommt per E-Mail und auf der Seite der Rücksendung.
- Eine Seite je Rücksendung. Kopf mit Kunde, Bestellung und Versand, Status mit Schrittleiste und Hinweis, was jetzt zu tun ist, Nachrichten, Labels, Belege und Verlauf.
- Prüfen, erstatten, nachliefern. Je Produkt Zustand und Weg festhalten, Bestand buchen, Erstattung mit Beleg oder Gutschrift in der Bestellung, kostenlose Nachlieferung als neue Bestellung zu 0 €.
- B-Ware verkaufen. Geprüfte Rückläufer mit Zustand und eigenem Preis neben der Neuware anbieten, mit eigener Position in Warenkorb und Bestellung.
- Retouren vermeiden. Dashboard und Statistiken zeigen Retourenquote, Gründe und Kommentare je Produkt. Aus auffälligen Gründen schlägt die Erweiterung Hinweise für die Kaufbox vor.
Der Nutzen auf einen Blick
- Weniger E-Mails und keine Labels von Hand.
- Jede Rücksendung an einer Stelle, mit Status, Nachrichten und Verlauf.
- Sauber erstattet, mit Beleg und richtigem Lagerbestand.
- Rückläufer als B-Ware zu Geld machen statt abschreiben.
- Weniger Retouren durch Zahlen und Hinweise an den richtigen Produkten.
Typische Anwendungsfälle
Mode und Schuhe: Der Kunde schickt zwei Größen zurück, eine passt nicht, eine gefällt nicht. Er meldet beides mit Grund an, druckt das DHL-Label oder zeigt den QR-Code in der Filiale. Du buchst die ungetragene Ware ins Lager und erstattest mit einem Klick.
Elektronik mit Defekt: Für „Produkt defekt“ verlangst du Fotos und einen Kommentar. Rücksendungen mit diesem Grund warten auf deine Freigabe, erst dann gibt es das Label. Du lieferst kostenlos ein neues Gerät nach.
Geöffnete Ware: Ein Rückläufer hat eine beschädigte Verpackung. Du verkaufst ihn als B-Ware im Zustand „Geöffnet, wie neu“ mit 20 % Nachlass, direkt auf der Produktseite neben der Neuware.
Gäste ohne Konto: Im Footer verlinkst du die Seite „Rücksendungen“. Der Gast meldet sich mit Bestellnummer und Postleitzahl an und legt die Rücksendung an, ohne ein Konto zu erstellen.
Auffälliges Produkt: Ein Hemd kommt oft mit „Fällt zu klein aus“ zurück. Die Erweiterung schlägt einen Hinweis vor, und ab sofort steht in der Kaufbox: „Fällt eine Nummer kleiner aus.“
Funktionen im Detail
Rücksendung anlegen
Im Kundenkonto steht die Seite „Rücksendungen“ mit den Reitern Alle, Aktiv und Beendet. Aus jeder Bestellung legt der Kunde eine Rücksendung an: je Produkt Menge, Grund und Vorgehensweise, ein Kommentar und bis zu drei Fotos oder Dateien, als Pflicht oder freiwillig je Grund. Produkte, die nicht zurückgehen, zeigt das Formular mit dem Grund, etwa „Schon zurückgeschickt mit Rücksendung 50231“. Bereits zurückgeschickte Stück werden abgezogen, die Prüfung gilt für Storefront, Store API und Administration gleich.
Ohne Kundenkonto: das Retourenportal
Gäste und Kunden ohne Anmeldung öffnen die Seite „Rücksendungen“, das Retourenportal deines Shops, unter einer eigenen Adresse je Sprache, etwa /ruecksendung. Mit Bestellnummer und E-Mail-Adresse oder Postleitzahl melden sie sich zu ihrer Bestellung an. Die Anmeldung ist gebremst wie der Gast-Login von Shopware und gilt in der Sitzung nur für diese Bestellung.
Versand und Labels
- DHL und UPS mit Zugangsdaten je Land und Verkaufskanal, prüfbar in der Administration.
- Wahl beim Anlegen: DHL, UPS oder selbst versenden, mit Logo und Preis.
- Label beim Absenden, bei DHL auf Wunsch mit QR-Code, mehrere Pakete je Rücksendung, auch aus der Administration und per E-Mail.
- Kostenlos oder kostenpflichtig, mit Mindestwarenwert und eigener Frist ab dem Lieferstatus.
- Sendungsverfolgung als Link zum Versanddienstleister, Protokoll der Anfragen in den Ereignis-Logs von Shopware.
Die Seite der Rücksendung
Der Kunde sieht den Stand wie bei einer Sendungsverfolgung, mit dem Datum jedes Schritts und dem Text des Status. Dazu Rücksendeschein und Labels, Nachrichten mit Dateien, das Ergebnis der Prüfung jedes Produkts, Erstattungen mit Beleg und Nachlieferungen. Zwei Designs stehen je Verkaufskanal zur Wahl: „Modern“ mit farbigem Kopf, Prozesskette und Karten oder „Standard“ wie die übrigen Kontoseiten von Shopware. Die Farben kommen aus deinem Theme.
In der Administration
Unter Bestellungen › Rücksendungen hat die Erweiterung ein eigenes Menü für die Retourenabwicklung, mit Seitenleiste: Dashboard, Statistiken, Rücksendungen, B-Ware, Produkthinweise, Abläufe, Versand und System.
- Liste mit Produkten und Warenwert, Status als Chip, Freigabe, offener Antwort, Grund und Versand, Filtern und CSV-Export.
- Rücksendung mit Kopfkarte, Statuskarte mit Schritten, Produkten, Nachrichten und internen Notizen, Labels und Belegen, Verlauf.
- Anlegen im Admin als Fenster an der Bestellung, mit Nachricht, Label und „gleich freigeben“.
- Reiter „Rücksendungen“ an Bestellung, Produkt und Kunde, mit Retourenquote, Gründen, Varianten und Liste.
Status, Freigabe und Abläufe
Status bekommen Art, Farbe, einen Text für den Kunden, einen Hinweis für das Team und die Wahl, ob sie in der Schrittleiste stehen und eine E-Mail schicken. Die Freigabe ist ab Werk aus und lässt sich für alle Rücksendungen oder nach Bedingungen einschalten: eine Regel des Rule Builders, Gründe, Vorgehensweisen, der Versandweg oder die Zahl der Rücksendungen eines Kunden. Zusammen mit der Rücksendungsnummer aus dem Nummernkreis „Rücksendungen“ ist das der Ablauf, den viele als RMA (Return Merchandise Authorization) kennen: erst stimmt der Shop zu, dann gibt es Rücksendeschein und Label. Gründe, Vorgehensweisen, Zustände und die Checkliste pflegst du im eigenen Menü.
Prüfen, Erstattung und Nachlieferung
Je Produkt hältst du fest, was der Kunde sagt, den Zustand und eine Notiz, auch für mehrere Produkte auf einmal. Dann der Weg: zurück in den Bestand, als B-Ware oder nur ausgleichen. Die Erstattung schlägt die Beträge der Bestellung vor, nimmt eigene Zeilen wie Versandkosten oder einen Abzug auf und erzeugt den Beleg „Erstattung“ oder auf Wunsch Gutschrift-Positionen in der Bestellung. Die kostenlose Nachlieferung legt eine neue Bestellung zu 0 € an die Adressen der Bestellung an. Danach schlägt das Fenster den passenden Lieferstatus der Bestellung vor.
B-Ware
Angebote je Variante mit Zustand, Kurzbeschreibung in jeder Sprache, eigenem Preis und Bestand. Im Shop steht ein Kasten unter dem Button „In den Warenkorb“ mit den Angeboten neben dem Preis der Neuware. B-Ware kommt als eigene Position in Warenkorb, Bestellung und Belege. Dazu die Regel „Warenkorb enthält B-Ware“ und Filter für dynamische Produktgruppen.
Dashboard, Statistiken und Produkthinweise
Das Dashboard zeigt vier Kennzahlen mit Vergleich zum Vorzeitraum, Aufgaben mit Link in die gefilterte Liste, offene Rücksendungen nach Status, den Verlauf und die auffälligsten Gründe und Produkte. Die Statistiken gehen in sieben Reitern tiefer: Verlauf, Gründe, Produkte, Kunden, Länder, Versand und Bearbeitung. Kommt ein Grund an einem Produkt über deine Schwellen, steht es in den Vorschlägen für Produkthinweise. Ein Hinweis erscheint in der Kaufbox über „In den Warenkorb“, für alle Varianten und in jeder Sprache.
E-Mails und Flow Builder
Neun E-Mail-Vorlagen im Stil der Shopware-Mails mit Status in seiner Farbe und den Produkten als Tabelle. Jede kommt aus einem Flow, ausgelöst von eigenen Ereignissen: Rücksendung angelegt, freigegeben, Status geändert, Label erstellt, Nachricht von Shop oder Kunde, Produkte geprüft und Erstattung gespeichert.
Einrichtung und Hilfe
Ein Einrichtungsassistent führt in neun Schritten durch die wichtigsten Einstellungen, mit Vorschau beider Designs. Jede Seite der Administration hat einen Button „Hilfe“, der jede Spalte, jeden Filter und jedes Feld erklärt. Für Shops ohne Storefront gibt es Routen der Store API für die Anmeldung zur Bestellung, das Anlegen, den Rücksendeschein und die Labels.
Hinweis zum Update von 8.x
Rücksendungen, Gründe, Vorgehensweisen, Status, Zugangsdaten und Einstellungen werden übernommen. Die Seiten für Kunden zeigen danach das Design „Modern“. Rollen ohne Administratorrechte brauchen das neue Recht „Rücksendungen nutzen (Vollzugriff)“. Bitte teste das Update zuerst in einer Staging-Umgebung, vor allem mit eigenem Theme.
Allgemeine Hinweise
- Textbausteine
Die Erweiterung verwendet Textbausteine, damit alle Texte und Beschriftungen bequem in der Administration in andere Sprachen übersetzt werden können. - Subshop-fähig
Relevante Optionen der Konfiguration können pro Verkaufskanal individuell angepasst werden. - Kompatibilität
Die Erweiterung ist stets mit der aktuellen Shopware-Version und dem Shopware-Standard-Theme kompatibel. - Inkompatibilität
Nutzt du ein individuelles Theme und/oder Erweiterungen von Drittanbietern, teste die Erweiterung bitte vor dem Kauf gründlich. Eine Kompatibilität kann nicht garantiert werden. - Responsive
Ob Desktop-PC, Tablet oder Smartphone: Die Erweiterung ist vollständig responsive. - Kostenlos testen und nutzen
Kostenpflichtige Erweiterungen kannst du 30 Tage lang kostenlos und unverbindlich testen (kostenloser Probemonat der Miet-Lizenz). Kostenlose Erweiterungen nutzt du dauerhaft kostenfrei. - Features
Die beschriebenen Features der Produktbeschreibung, der Screenshots und des Demoshops beziehen sich immer auf die aktuellste Version der Erweiterung. - Individuelle Änderungswünsche
Jedes Unternehmen ist einzigartig und bedarf individueller Lösungen, die exakt auf die eigenen Arbeitsabläufe zugeschnitten sind. Nimm unverbindlich Kontakt zu mir auf: Ich passe meine Erweiterungen gerne an deine Anforderungen an und integriere sie maßgeschneidert in deine hauseigenen Prozesse. - Haftungsausschluss
Der Hersteller dieser Erweiterung haftet nicht für Schäden, insbesondere nicht für mittelbare oder unmittelbare Folgeschäden, Datenverlust, entgangene Gewinne, System- oder Produktionsausfälle, die durch die Nutzung der Erweiterung entstehen, ausgenommen Vorsatz oder grobe Fahrlässigkeit.
Kontakt
- Telefon
+49 (0) 234 97354482 - Internet
info@digitvision.de
https://www.digitvision.de - Anschrift
Hevener Straße 65
44797 Bochum
Über mich
- 20+ Jahre Erfahrung
Seit über 20 Jahren im E-Commerce und seit über 10 Jahren exklusiv mit Shopware. Dein Spezialist mit umfangreichem Branchen- und Fachwissen. - Zuverlässig
Shopware ist meine Leidenschaft und mein Hobby. Ich kümmere mich zuverlässig und engagiert um dein Projekt, als wäre es mein eigenes. - Qualität
Hohe Service-Qualität steht im Mittelpunkt. Ich verwende modernste Design Patterns, aktuelle Technologien und innovative Werkzeuge.
Dein kompetenter Partner
Bereits seit über 20 Jahren bin ich als leidenschaftlicher Web-Entwickler im E-Commerce tätig. In dieser Zeit konnte ich bereits viele Unternehmen bei interessanten Projekten beraten und ausführend unterstützen. Dabei stehe ich für unkomplizierte Kommunikation, zukunftsfähige Lösungen, moderne Technologien und ein hohes Engagement.
Jedes Unternehmen ist einzigartig und bedarf individueller Lösungen, die exakt auf die eigenen Arbeitsabläufe zugeschnitten sind. Nimm unverbindlich Kontakt zu mir auf: Ich passe meine Erweiterungen gerne an deine Anforderungen an und integriere sie maßgeschneidert in deine hauseigenen Prozesse. Gerne erstelle ich dir Angebote für Anpassungen oder ggf. individuell programmierte Erweiterungen ganz nach deinen Wünschen.
DEMOSHOP VERFÜGBAR
Teste alle Funktionen vorab im Demoshop: Storefront mit angelegtem Kundenkonto und volle Administration, jede Nacht frisch zurückgesetzt. Zugang über „Zur Demo“ unter den Screenshots.
WEBSEITE
Mehr zu Rücksendungen & Retouren auf shop-retoure.de.
BESCHREIBUNG
Rücksendungen ohne E-Mail-Pingpong: Deine Kunden melden Retouren selbst an, direkt aus der Bestellung im Kundenkonto oder als Gast im Retourenportal deines Shops mit Bestellnummer und E-Mail-Adresse. Sie wählen Produkte, Menge und Grund, hängen Fotos an und bekommen gleich das DHL- oder UPS-Retourenlabel, bei DHL auch als QR-Code für die Abgabe ohne Drucker.
Im Retourenmanagement der Administration hat jede Rücksendung ihre eigene Seite: Status mit Schritten, Nachrichten mit dem Kunden, Prüfen und Abhaken der Produkte, Erstattung mit Beleg, kostenlose Nachlieferung und ein vollständiger Verlauf. Geprüfte Ware geht zurück ins Lager oder als B-Ware wieder in den Verkauf, und Dashboard, Statistiken und Produkthinweise helfen dir, Retouren gar nicht erst entstehen zu lassen.
Das Problem, das du kennst
- Retouren per E-Mail. Der Kunde schreibt, du fragst nach Bestellnummer, Produkt und Grund, schickst ein Label von Hand und suchst später die Mail wieder heraus.
- Kein Überblick. Welche Rücksendung ist angekommen, welche wartet auf eine Antwort, welche ist schon erstattet? Das steht verteilt in Postfach, Notizen und Tabellen.
- Labels kosten Zeit. Jedes Retourenlabel wird im Portal des Versanddienstleisters erstellt, abgetippt und verschickt.
- Erstattung von Hand. Beträge, Versandkosten und Abzüge werden ausgerechnet, ein Beleg fehlt, und der Lagerbestand stimmt danach nicht mehr.
- Rückläufer bleiben liegen. Geöffnete oder leicht beschädigte Ware lässt sich als Neuware nicht mehr verkaufen und landet im Regal.
- Die Ursache bleibt unbekannt. Welches Produkt kommt warum zurück? Ohne Zahlen fällt das erst auf, wenn die Marge schon weg ist.
So löst die Erweiterung das
- Anmelden in wenigen Klicks. Aus der Bestellung im Kundenkonto oder als Gast über die Anmeldung zur Bestellung. Ein Formular für Produkte, Menge, Grund, Vorgehensweise, Kommentar und Fotos, mit Prüfung jeder Angabe.
- Labels automatisch. DHL und UPS mit deinen Zugangsdaten je Land und Verkaufskanal. Das Label entsteht beim Absenden, kostenlos oder kostenpflichtig, und kommt per E-Mail und auf der Seite der Rücksendung.
- Eine Seite je Rücksendung. Kopf mit Kunde, Bestellung und Versand, Status mit Schrittleiste und Hinweis, was jetzt zu tun ist, Nachrichten, Labels, Belege und Verlauf.
- Prüfen, erstatten, nachliefern. Je Produkt Zustand und Weg festhalten, Bestand buchen, Erstattung mit Beleg oder Gutschrift in der Bestellung, kostenlose Nachlieferung als neue Bestellung zu 0 €.
- B-Ware verkaufen. Geprüfte Rückläufer mit Zustand und eigenem Preis neben der Neuware anbieten, mit eigener Position in Warenkorb und Bestellung.
- Retouren vermeiden. Dashboard und Statistiken zeigen Retourenquote, Gründe und Kommentare je Produkt. Aus auffälligen Gründen schlägt die Erweiterung Hinweise für die Kaufbox vor.
Der Nutzen auf einen Blick
- Weniger E-Mails und keine Labels von Hand.
- Jede Rücksendung an einer Stelle, mit Status, Nachrichten und Verlauf.
- Sauber erstattet, mit Beleg und richtigem Lagerbestand.
- Rückläufer als B-Ware zu Geld machen statt abschreiben.
- Weniger Retouren durch Zahlen und Hinweise an den richtigen Produkten.
Typische Anwendungsfälle
Mode und Schuhe: Der Kunde schickt zwei Größen zurück, eine passt nicht, eine gefällt nicht. Er meldet beides mit Grund an, druckt das DHL-Label oder zeigt den QR-Code in der Filiale. Du buchst die ungetragene Ware ins Lager und erstattest mit einem Klick.
Elektronik mit Defekt: Für „Produkt defekt“ verlangst du Fotos und einen Kommentar. Rücksendungen mit diesem Grund warten auf deine Freigabe, erst dann gibt es das Label. Du lieferst kostenlos ein neues Gerät nach.
Geöffnete Ware: Ein Rückläufer hat eine beschädigte Verpackung. Du verkaufst ihn als B-Ware im Zustand „Geöffnet, wie neu“ mit 20 % Nachlass, direkt auf der Produktseite neben der Neuware.
Gäste ohne Konto: Im Footer verlinkst du die Seite „Rücksendungen“. Der Gast meldet sich mit Bestellnummer und Postleitzahl an und legt die Rücksendung an, ohne ein Konto zu erstellen.
Auffälliges Produkt: Ein Hemd kommt oft mit „Fällt zu klein aus“ zurück. Die Erweiterung schlägt einen Hinweis vor, und ab sofort steht in der Kaufbox: „Fällt eine Nummer kleiner aus.“
Funktionen im Detail
Rücksendung anlegen
Im Kundenkonto steht die Seite „Rücksendungen“ mit den Reitern Alle, Aktiv und Beendet. Aus jeder Bestellung legt der Kunde eine Rücksendung an: je Produkt Menge, Grund und Vorgehensweise, ein Kommentar und bis zu drei Fotos oder Dateien, als Pflicht oder freiwillig je Grund. Produkte, die nicht zurückgehen, zeigt das Formular mit dem Grund, etwa „Schon zurückgeschickt mit Rücksendung 50231“. Bereits zurückgeschickte Stück werden abgezogen, die Prüfung gilt für Storefront, Store API und Administration gleich.
Ohne Kundenkonto: das Retourenportal
Gäste und Kunden ohne Anmeldung öffnen die Seite „Rücksendungen“, das Retourenportal deines Shops, unter einer eigenen Adresse je Sprache, etwa /ruecksendung. Mit Bestellnummer und E-Mail-Adresse oder Postleitzahl melden sie sich zu ihrer Bestellung an. Die Anmeldung ist gebremst wie der Gast-Login von Shopware und gilt in der Sitzung nur für diese Bestellung.
Versand und Labels
- DHL und UPS mit Zugangsdaten je Land und Verkaufskanal, prüfbar in der Administration.
- Wahl beim Anlegen: DHL, UPS oder selbst versenden, mit Logo und Preis.
- Label beim Absenden, bei DHL auf Wunsch mit QR-Code, mehrere Pakete je Rücksendung, auch aus der Administration und per E-Mail.
- Kostenlos oder kostenpflichtig, mit Mindestwarenwert und eigener Frist ab dem Lieferstatus.
- Sendungsverfolgung als Link zum Versanddienstleister, Protokoll der Anfragen in den Ereignis-Logs von Shopware.
Die Seite der Rücksendung
Der Kunde sieht den Stand wie bei einer Sendungsverfolgung, mit dem Datum jedes Schritts und dem Text des Status. Dazu Rücksendeschein und Labels, Nachrichten mit Dateien, das Ergebnis der Prüfung jedes Produkts, Erstattungen mit Beleg und Nachlieferungen. Zwei Designs stehen je Verkaufskanal zur Wahl: „Modern“ mit farbigem Kopf, Prozesskette und Karten oder „Standard“ wie die übrigen Kontoseiten von Shopware. Die Farben kommen aus deinem Theme.
In der Administration
Unter Bestellungen › Rücksendungen hat die Erweiterung ein eigenes Menü für die Retourenabwicklung, mit Seitenleiste: Dashboard, Statistiken, Rücksendungen, B-Ware, Produkthinweise, Abläufe, Versand und System.
- Liste mit Produkten und Warenwert, Status als Chip, Freigabe, offener Antwort, Grund und Versand, Filtern und CSV-Export.
- Rücksendung mit Kopfkarte, Statuskarte mit Schritten, Produkten, Nachrichten und internen Notizen, Labels und Belegen, Verlauf.
- Anlegen im Admin als Fenster an der Bestellung, mit Nachricht, Label und „gleich freigeben“.
- Reiter „Rücksendungen“ an Bestellung, Produkt und Kunde, mit Retourenquote, Gründen, Varianten und Liste.
Status, Freigabe und Abläufe
Status bekommen Art, Farbe, einen Text für den Kunden, einen Hinweis für das Team und die Wahl, ob sie in der Schrittleiste stehen und eine E-Mail schicken. Die Freigabe ist ab Werk aus und lässt sich für alle Rücksendungen oder nach Bedingungen einschalten: eine Regel des Rule Builders, Gründe, Vorgehensweisen, der Versandweg oder die Zahl der Rücksendungen eines Kunden. Zusammen mit der Rücksendungsnummer aus dem Nummernkreis „Rücksendungen“ ist das der Ablauf, den viele als RMA (Return Merchandise Authorization) kennen: erst stimmt der Shop zu, dann gibt es Rücksendeschein und Label. Gründe, Vorgehensweisen, Zustände und die Checkliste pflegst du im eigenen Menü.
Prüfen, Erstattung und Nachlieferung
Je Produkt hältst du fest, was der Kunde sagt, den Zustand und eine Notiz, auch für mehrere Produkte auf einmal. Dann der Weg: zurück in den Bestand, als B-Ware oder nur ausgleichen. Die Erstattung schlägt die Beträge der Bestellung vor, nimmt eigene Zeilen wie Versandkosten oder einen Abzug auf und erzeugt den Beleg „Erstattung“ oder auf Wunsch Gutschrift-Positionen in der Bestellung. Die kostenlose Nachlieferung legt eine neue Bestellung zu 0 € an die Adressen der Bestellung an. Danach schlägt das Fenster den passenden Lieferstatus der Bestellung vor.
B-Ware
Angebote je Variante mit Zustand, Kurzbeschreibung in jeder Sprache, eigenem Preis und Bestand. Im Shop steht ein Kasten unter dem Button „In den Warenkorb“ mit den Angeboten neben dem Preis der Neuware. B-Ware kommt als eigene Position in Warenkorb, Bestellung und Belege. Dazu die Regel „Warenkorb enthält B-Ware“ und Filter für dynamische Produktgruppen.
Dashboard, Statistiken und Produkthinweise
Das Dashboard zeigt vier Kennzahlen mit Vergleich zum Vorzeitraum, Aufgaben mit Link in die gefilterte Liste, offene Rücksendungen nach Status, den Verlauf und die auffälligsten Gründe und Produkte. Die Statistiken gehen in sieben Reitern tiefer: Verlauf, Gründe, Produkte, Kunden, Länder, Versand und Bearbeitung. Kommt ein Grund an einem Produkt über deine Schwellen, steht es in den Vorschlägen für Produkthinweise. Ein Hinweis erscheint in der Kaufbox über „In den Warenkorb“, für alle Varianten und in jeder Sprache.
E-Mails und Flow Builder
Neun E-Mail-Vorlagen im Stil der Shopware-Mails mit Status in seiner Farbe und den Produkten als Tabelle. Jede kommt aus einem Flow, ausgelöst von eigenen Ereignissen: Rücksendung angelegt, freigegeben, Status geändert, Label erstellt, Nachricht von Shop oder Kunde, Produkte geprüft und Erstattung gespeichert.
Einrichtung und Hilfe
Ein Einrichtungsassistent führt in neun Schritten durch die wichtigsten Einstellungen, mit Vorschau beider Designs. Jede Seite der Administration hat einen Button „Hilfe“, der jede Spalte, jeden Filter und jedes Feld erklärt. Für Shops ohne Storefront gibt es Routen der Store API für die Anmeldung zur Bestellung, das Anlegen, den Rücksendeschein und die Labels.
Hinweis zum Update von 8.x
Rücksendungen, Gründe, Vorgehensweisen, Status, Zugangsdaten und Einstellungen werden übernommen. Die Seiten für Kunden zeigen danach das Design „Modern“. Rollen ohne Administratorrechte brauchen das neue Recht „Rücksendungen nutzen (Vollzugriff)“. Bitte teste das Update zuerst in einer Staging-Umgebung, vor allem mit eigenem Theme.
Allgemeine Hinweise
- Textbausteine
Die Erweiterung verwendet Textbausteine, damit alle Texte und Beschriftungen bequem in der Administration in andere Sprachen übersetzt werden können. - Subshop-fähig
Relevante Optionen der Konfiguration können pro Verkaufskanal individuell angepasst werden. - Kompatibilität
Die Erweiterung ist stets mit der aktuellen Shopware-Version und dem Shopware-Standard-Theme kompatibel. - Inkompatibilität
Nutzt du ein individuelles Theme und/oder Erweiterungen von Drittanbietern, teste die Erweiterung bitte vor dem Kauf gründlich. Eine Kompatibilität kann nicht garantiert werden. - Responsive
Ob Desktop-PC, Tablet oder Smartphone: Die Erweiterung ist vollständig responsive. - Kostenlos testen und nutzen
Kostenpflichtige Erweiterungen kannst du 30 Tage lang kostenlos und unverbindlich testen (kostenloser Probemonat der Miet-Lizenz). Kostenlose Erweiterungen nutzt du dauerhaft kostenfrei. - Features
Die beschriebenen Features der Produktbeschreibung, der Screenshots und des Demoshops beziehen sich immer auf die aktuellste Version der Erweiterung. - Individuelle Änderungswünsche
Jedes Unternehmen ist einzigartig und bedarf individueller Lösungen, die exakt auf die eigenen Arbeitsabläufe zugeschnitten sind. Nimm unverbindlich Kontakt zu mir auf: Ich passe meine Erweiterungen gerne an deine Anforderungen an und integriere sie maßgeschneidert in deine hauseigenen Prozesse. - Haftungsausschluss
Der Hersteller dieser Erweiterung haftet nicht für Schäden, insbesondere nicht für mittelbare oder unmittelbare Folgeschäden, Datenverlust, entgangene Gewinne, System- oder Produktionsausfälle, die durch die Nutzung der Erweiterung entstehen, ausgenommen Vorsatz oder grobe Fahrlässigkeit.
Kontakt
- Telefon
+49 (0) 234 97354482 - Internet
info@digitvision.de
https://www.digitvision.de - Anschrift
Hevener Straße 65
44797 Bochum
Über mich
- 20+ Jahre Erfahrung
Seit über 20 Jahren im E-Commerce und seit über 10 Jahren exklusiv mit Shopware. Dein Spezialist mit umfangreichem Branchen- und Fachwissen. - Zuverlässig
Shopware ist meine Leidenschaft und mein Hobby. Ich kümmere mich zuverlässig und engagiert um dein Projekt, als wäre es mein eigenes. - Qualität
Hohe Service-Qualität steht im Mittelpunkt. Ich verwende modernste Design Patterns, aktuelle Technologien und innovative Werkzeuge.
Dein kompetenter Partner
Bereits seit über 20 Jahren bin ich als leidenschaftlicher Web-Entwickler im E-Commerce tätig. In dieser Zeit konnte ich bereits viele Unternehmen bei interessanten Projekten beraten und ausführend unterstützen. Dabei stehe ich für unkomplizierte Kommunikation, zukunftsfähige Lösungen, moderne Technologien und ein hohes Engagement.
Jedes Unternehmen ist einzigartig und bedarf individueller Lösungen, die exakt auf die eigenen Arbeitsabläufe zugeschnitten sind. Nimm unverbindlich Kontakt zu mir auf: Ich passe meine Erweiterungen gerne an deine Anforderungen an und integriere sie maßgeschneidert in deine hauseigenen Prozesse. Gerne erstelle ich dir Angebote für Anpassungen oder ggf. individuell programmierte Erweiterungen ganz nach deinen Wünschen.
Details
- Verfügbar in: Englisch, Deutsch
- Zuletzt aktualisiert: 18. November 2026
- Veröffentlicht: 20. Mai 2020
- Version: 9.0.1
- Kategorie: Versanddienstleister
Ressourcen
Bewertungen (13)
Durchschnittliche Bewertung von 4.81 von 5 Sternen
great plugin
Durchschnittliche Bewertung von 5 von 5 Sternen
Alles super!
Durchschnittliche Bewertung von 5 von 5 Sternen
Starkes Plugin
Durchschnittliche Bewertung von 5 von 5 Sternen
Über den Extension Partner
digitvision
Partner Status
-
Shopware
Premium Extension Partner
Details
-
Ø-Bewertung:
4.9
Durchschnittliche Bewertung von 4.9 von 5 Sternen
- Partner seit: 2018
- Erweiterungen: 109
Support
- Land: Germany
- Spricht: Deutsch, Englisch
- Reaktionszeit: Sehr schnell
Anleitung
- Installiere und aktiviere die Erweiterung.
- Gib Rollen ohne Administratorrechte das Recht „Rücksendungen nutzen (Vollzugriff)“: Einstellungen › System › Benutzer & Rechte › Rollen, bei „Zusätzliche Berechtigungen“.
- Öffne Bestellungen › Rücksendungen. Der Einrichtungsassistent führt dich in neun Schritten durch die wichtigsten Einstellungen: Design, Bedingungen, Frist, Formular, Fotos und Dateien, Freigabe, Versand, E-Mails und B-Ware.
- Pflege im Menü der Rücksendungen unter „Abläufe“ deine Gründe, Vorgehensweisen, Status, Zustände und die Checkliste.
- Für Retourenlabels trägst du unter „Versand“ bei DHL oder UPS die Zugangsdaten deines Vertrags je Land und Verkaufskanal ein und prüfst sie dort.
- Unter „System“ › „Flows“ legst du fest, welche E-Mails an deine Kunden und an dein Team gehen.
- Verlinke die Seite „Rücksendungen“ für Gäste an einer beliebigen Stelle deines Shops, etwa im Footer. Ihre Adresse legst du in der Konfiguration je Sprache fest, zum Beispiel /ruecksendung. Kunden mit Konto legen Rücksendungen zusätzlich direkt aus ihren Bestellungen an.
9.0.1 6.7.0.0 - 6.7.16.1
- fixed shopware 6.7.0 to 6.7.9 compatibility
- fixed php deprecation notices when reading statuses, reasons, procedures and checklist points
9.0.0 6.7.0.0 - 6.7.16.1
- IMPORTANT: the storefront and the administration are completely refactored and have a new design; the pages for customers get the new Modern design. Please test the update in a staging environment first, especially if your own theme changes the templates or styles of the return shipment pages
- IMPORTANT: roles without administrator rights need the new permission "Use return shipments (full access)", otherwise the return shipments menu disappears after the update
- IMPORTANT: every mail is sent by a flow now and the update switches on the same flows as a new installation: customers get a mail on a change of the status and on every new label, the team on every new return shipment and every message of a customer, sent to the email address of the basic information of the shop; please check the flows in the menu of the return shipments right after the update
- IMPORTANT: own or changed statuses stay as they are and become grey open statuses without a mail to the customer, the delivered ones keep their meaning by their id, also when renamed; please set type, colour, steps and mail of your own statuses right after the update
- added the dark theme of the administration (Shopware 6.7.15) to the side menu and the figures of dashboard and statistics
- added a side menu to every page of the return shipments with dashboard, statistics, return shipments, b-stock, product hints and suggestions, reasons, procedures, statuses, conditions, checklist, DHL, UPS, flows, mail templates, settings, the setup assistant and a link to the manual
- added a permission for the return shipments as one switch under additional permissions
- added a help button to every page of the return shipments; its window explains the page in several tabs, with one line for every column, filter, field and button, separately for lists and detail pages
- added a setup assistant in nine steps through the settings, with a preview of both designs; it opens once by itself and from the side menu at any time
- added a window "much is new" before the setup assistant in shops that already have return shipments, with a red notice that roles without administrator rights need the new permission
- added that a status a return shipment stands in or had in its history cannot be deleted, also not through the API
- added a window when deleting a status in use, with the number of return shipments using it
- added the columns products with the value of the goods, and reason to the list of return shipments
- added the filters reason, carrier and creation date to the list of return shipments
- added a head card to the return shipment with a band in the colour of the status and the date since it applies
- added customer with initials, order with date and value, and the shipment numbers with their carrier to the head card of a return shipment
- added a strip with value of the goods, products, checked products and messages to the head card of a return shipment
- added a strip "approval pending" with "approve" below the band of the head card
- added "next" and "decline" to the head of the status card of a return shipment, with the steps and a hint for the team
- added a type, a colour, a hint for the team and the option to show a status in the steps to the statuses, the steps are the timeline of a return shipment for customer and team; shops that still have the four statuses of the installation keep them with the short names open, in progress, completed and declined and get the status "received" between open and in progress
- added a history to every return shipment with creation (with its files, the comment of the customer and why it waits for the approval), status changes, approvals (with the mail to the customer), checked products, labels, shipment numbers entered by hand, messages (with their files), mails and the first download of return slip and label by the customer, in a standard data grid whose columns take the width of their content
- added messages between shop and customer with internal notes, in the administration and on the return shipment page
- added the column reply and a filter for return shipments whose customer waits for an answer
- added checking returned products: per product what the customer says, the condition and a note
- added the compensation at the check, a refund or a replacement delivery, both switched off until switched on
- added ticking and completing the check for several products at once, always with all pieces of a position
- added reopening a checked product as long as no refund and no replacement delivery contains it
- added conditions of returned goods, with five conditions included
- added labels as records per package with carrier, shipment number, files and failed attempts with the message of the carrier
- added a window to create labels for one or more packages in the administration, opened in the card of the labels, with the rules for customers as a warning and optionally a mail to the customer
- added the shipment number of packages without a label below the list of the labels, saved with "apply"
- added a window that asks before a label goes to the customer by mail once more
- added a mail template with the labels as attachments and links to track the shipments
- added links to track DHL and UPS shipments to the labels of a return shipment in the administration
- added a list of the labels with download and tracking to the return shipment page of the customer
- added a link to the order and its payment to the notice on an unpaid chargeable label
- added triggers for the flow builder: return shipment created, return shipment approved, status changed, label created, resend label, message from the shop, message from the customer, products checked and refund saved
- added flows and mail templates for every mail of the return shipments, with new mails to the customer on a change of status and to the team on checked products (this flow switched off)
- added mails built like the mails of Shopware, with the status in its colour, the products as a table and a text link to the return shipment
- added the pages flows and mail templates to the menu of the return shipments
- added a note at the end of the configuration on what an uninstall with "remove all app data permanently" deletes and what stays
- added a minimum value of goods for UPS labels like for DHL
- added the switch "send mail to the customer" to the statuses, switched on for in progress, completed and declined
- added a text for the customer to the statuses, shown on the return shipment page and in the mail on a change of status, with texts for the statuses of the installation
- added a window to "complete check" with what is booked, the status after the check and the tick "inform the customer by mail"; the status is preselected with the "suggestion after the check" of the statuses (when a product is checked or when every product is checked, only forward), no status changes without the window
- added the "suggestion after the check" to the status "in progress" with the update, when the four delivered statuses are unchanged, otherwise the shop sets it at its statuses when it wants one
- added a window to change the status of a return shipment with the tick "inform the customer by mail", preselected by the new status
- added the tick "inform the customer by mail" to creating a return shipment in the administration
- added creating a return shipment in the list of return shipments
- added a search for the order, the rules for customers as a warning, a message to the customer, a label and the tick "approve right away" to creating a return shipment in the administration
- added the manual approval of return shipments as a setting, switched off: always, or only when a new return shipment meets a condition
- added the conditions of the approval: a rule of the rule builder checked against the products sent back, chosen reasons, procedures or ways of shipping, or a number of returns of the customer in a period
- added that a return shipment of a customer waiting for the approval gets the return document and the labels only afterwards
- added the conditions a return shipment met to the strip "approval pending" in the head of a return shipment
- added approving return shipments in the administration with a window at the return shipment, with a column and a filter for return shipments that wait for the approval and the conditions met as a tooltip
- added the tick "attach label" to the window of the approval, shown when a return shipment can get a label and preselected following the setting of the attachments
- added a mail template and a flow for the approval, the mail carries the return document following the setting of the attachments and the labels following the tick of the window
- added to the mails on creation and on approval whether the return document and the label are attached or on the page of the return shipment
- added refunds in a window with the products checked with a refund and an amount per product
- added own lines such as shipping costs or a deduction to a refund, each confirmed in its row
- added the status after a refund, preset with completed once nothing is open, and its mail to the customer if ticked
- added any number of refunds per return shipment; if wanted their lines go into the order as minus positions like "add credit" of Shopware
- added the cards refunds and replacement deliveries to the return shipment with every product checked for them and its state
- added the window "delivery status of the order" after a return shipment with checked products is completed: like the returns management of Shopware it suggests "returned partially" or "returned" for the shipped order by the pieces back, with the mail of Shopware only if wanted; it does not come when the order has the status already
- added the tab return shipments to products with pieces sold and returned, the return rate against the shop, the most frequent reason, each variant and the return shipments of a period
- added the reasons to the tab return shipments of a product: share of the sales and newest comment per reason
- added a window with all comments of a reason at the product
- added hints against returns at the main product: any number, translatable, with position and optional reason
- added the hints of the main product to the buy box above the button to the cart, for all variants
- added the card hints to the tab return shipments of a product to create, edit and delete hints
- added the menu group product hints with the list of all hints and the suggestions
- added suggestions for a main product and a reason over both thresholds without a hint with this reason
- added "reject hint" to the suggestions: a product is never suggested again for the rejected reason
- added an empty state to every list of the menu without any entry: what the page is for, where its entries come from and the next step
- added a colour to every condition, shown as its chip in the lists, at the product and in the compensation of a return shipment; the delivered conditions go from green over blue, orange and red to black
- added the tab return shipments to customers with their return shipments, return rate, refunds, replacement deliveries and most frequent reason
- added b-stock: offers of returned goods at a product with a condition, an optional short description in every language, an own price and an own stock, in the new tab b-stock of the product and in a list of all offers in the menu, with the settings "offer b-stock in the shop" and "leave b-stock out of promotions", both switched off
- added "resell" to checking returned products: into the stock as new goods or as b-stock, and the card b-stock of a return shipment with the window "create b-stock" that adds the pieces to a chosen offer of the variant or creates a new offer with its condition, short description and price (the same condition and short description count up), with the status afterwards
- added a window before reopening a checked product whose b-stock is created, it takes the pieces out of the offer again
- added b-stock in the shop: a box below the buy button and the product number with the offers of the variant, its condition, short description, pieces left and price next to the price of the new goods, an own position in the cart, checkout and order with "(B-stock)" after the name in the language of the sales channel and at most the pieces of the offer, the stock of the offer goes down with the order, discounts on the whole cart take b-stock unless it is left out, the e-invoice lists it as a product, and the documents show its condition and short description below the name
- added the rule "cart contains b-stock" with optional conditions, b-stock with active, stock and condition as filters of dynamic product groups, and condition and short description of b-stock in the positions of an order in the administration
- added the document "refund" ("return shipment refund" under the documents of the order) as a document type of its own with a number range of its own, referring to the invoice of the order
- added the credit note of Shopware instead of the document "refund" when the lines of a refund go into the order
- added a mail template and a flow for refunds, the mail carries the document of the refund and shows the lines as the order shows its prices, then net total, the tax (including or plus) and the total gross
- added free replacement deliveries: a new order for nothing for the customer at the addresses of the order, with any products and pieces, the shipping and payment method to choose and the order confirmation of the shop if wanted; prefilled with the products checked with a replacement delivery, each can be swapped for another product, the status afterwards as with a refund, any number per return shipment
- added the choice "compensation at the check" to the procedures (no compensation, refund or replacement delivery), it is chosen for their products when the compensation is switched on at the check; the delivered procedures get refund or replacement delivery also on an update as long as they keep their delivered names, own and renamed procedures start without compensation
- added a line below every tick "inform the customer by mail" when no active flow sends that mail, with the way to the flows
- added the tabs all, active and closed with their counts and pages to the page return shipments in the account
- added the dashboard over all sales channels: four key figures of a period in their own colours against the previous one with four facts below, what is open as tasks with a link into the list with the filter set, the open return shipments per status, the return shipments per day, week or month by carrier, the most frequent reasons, the most returned products and the latest return shipments, with the setting "open for long from days"
- added the filters compensation open, b-stock open and open for long to the list of return shipments
- added filters in the address of the list of return shipments, used by the links of the dashboard
- added the CSV export of the list of return shipments with its filters and search for the days of creation chosen, one line per position, read slice by slice with a progress bar and built in the browser
- added the statistics over all sales channels in the tabs history, reasons, products, customers, countries, shipping and processing, each for 30 days, 90 days, 12 months or the whole time with four key figures in the colours of the dashboard and sortable tables
- added parts of dashboard and statistics that load on their own: a figure that counts every order of the period keeps no other figure waiting and stands grey with a spinner until it is there
- added a store of the figures of dashboard and statistics: figures over every order are counted at most once an hour, all others every five minutes; hovering a figure shows when it was counted
- added an index on the creation date of return shipments for dashboard and statistics
- added the steps like a parcel tracking with the date each was reached and the text of the status to the return shipment page
- added the result of the check of every product, refunds with their document and replacement deliveries to the return shipment page
- added the QR code of the label in a window and a short explanation to each section of the return shipment page
- added that a completed or declined return shipment shows only its products with their result on the return shipment page, without the steps for packing and sending
- added a note instead of the return document and the label while the approval is pending
- added the flow of every mail to the history
- added a short explanation to each section of the page to create a return shipment; missing details are marked at the field and nothing entered gets lost
- added the choice of the shipping to creating a return shipment: DHL or UPS, with the price when the label is chargeable, or shipping oneself
- added creating the label of a free carrier on sending, also through the store API with the new field carrier
- added the reason why a product can not be returned, or which return shipment has it already, to the page to create a return shipment
- added photos and files to the products of a return shipment, up to three per product, optional or required per reason, kept as private media and shown to the customer and in the administration
- added the settings "largest file in MB" and "allowed file types" for photos and files
- added deleting the files with their media together with their return shipment, position or message
- added files to messages in both directions with the new setting "allow files at messages", switched off
- added the fields photos and files, comment required and help text for the customer to the reasons, and the help text to the procedures
- added the logos of DHL and UPS to the choice of the shipping, with the settings "show logo at the shipping" and "logo" per carrier
- added the shipping the customer chose to the head of a return shipment in the administration
- added the label of the carrier the customer chose to the return shipment page; customers get labels only of that carrier, and the first label of a return shipment without a choice makes the choice
- added the address of the return document to the return shipment page for shipping oneself
- added the store API route order-login with the same check as the login to the order
- added an own SEO address per language for the page returns, with the name of the language in front and a warning when a page of the shop already uses the address; the links of the extension use the address of the language
- added a warning to the log of the shop when the label for the mail on creation cannot be made, with the return shipment, the carrier and the message
- refactored the administration of the return shipments, with a side menu of its own
- refactored the list and the detail page of return shipments in the administration
- refactored the mails of the return shipments to flows and mail templates of shopware
- refactored the php code of the plugin into small services with clear interfaces, the carriers dhl and ups behind one interface and slim controllers
- refactored the php classes of the plugin: renamed and sorted into new folders, extensions that decorate or call them have to follow the new names; orders no longer carry the runtime extension dvsn_return_shipment (status, id and validity of the first return shipment), the association dvsnReturnShipments of an order stays
- refactored installation, update and uninstall into one class per topic, an update brings what came with a version only once
- refactored the texts of the mail templates into one file per language and format
- refactored the storefront templates details/customer-comment.html.twig and details/public-comment.html.twig into details/conversation.html.twig, please check your theme if it extends them
- refactored the storefront pages of the return shipments in the account
- changed the column shipment number of the list of return shipments into shipping: the newest label, without one the shipping the customer chose
- changed the status in the list of return shipments into a coloured chip
- changed the hint on vouchers at the products of a return shipment to name every promotion and credit of the order with its code or name and amount
- changed the page of a return shipment to save every change at once, its head bar has help and back instead of save and abort
- changed the documents of a return shipment in the administration into a list with the return document and the documents of the refunds, each with its date and a download
- changed creating a return shipment in the administration into a window instead of a page, at the order and in the order list
- changed the mail on creation of a return shipment created in the administration to carry no labels, they come with their own mail
- changed the page return shipments in the account into an overview that points to the orders, with the button to create a return shipment with order number and email address
- changed the return shipments in the account into a list with products, status and progress instead of a table
- changed the loading of every list to the placeholder rows of Shopware instead of a spinner
- changed the section new return shipment on the page of an order to show the ordered and still possible pieces of every product and the deadline
- changed the page to create a return shipment into one form with the products, the shipping, a comment and the checklist, which was a window before
- changed the login to the order with order number and email address or postal code to be slowed down like the guest login of Shopware
- changed the login to the order to stay valid for this order in the session; a link to a return shipment opens it after the login
- changed the page returns with the login to the order to the layout of the guest login of Shopware, with the order number filled in from the link
- changed the link "Return shipments" of the account menu for visitors without login to lead to the login to the order
- changed the lists of reasons, procedures, statuses and checklist and the DHL and UPS credentials to the menu of the return shipments, they are no longer under settings and extensions
- changed creating a return shipment in the administration to check the open pieces on the server, the page to create a return shipment is removed
- changed the positions that can go back into a service that can be decorated: standard products of Shopware and, as before, sets of the set configurator with their chosen products; it also decides the pieces for the delivery status and the return rate
- changed creating a return shipment in the administration to follow the rules of the shop: sets can go back there as well, bought labels and downloads can not
- changed the return document in the administration to come through the API of the administration instead of the storefront
- changed the label buttons of the storefront to give the newest label of a carrier and create one only if there is none
- changed the texts of the return shipment pages in the storefront to texts without direct address
- changed the buttons of the storefront that create a return shipment, log in to an order or create a label to show the loading indicator of Shopware while sending, with the messages of Shopware below empty required fields
- changed the labels of a customer to at most five per return shipment, all labels counted on the server; before, the page allowed five more labels per visit
- changed the shipment number field of a return shipment to the packages without a label, the numbers of the labels are no longer appended to it
- changed creating a return shipment in the storefront and through the store API to one check of order, customer, open pieces, reason and procedure; the store API answers a refused request with 400, the code return_shipment_invalid and every finding
- changed digital products to be excluded from return shipments, in the shop, the store API and the administration
- changed the mail on creating a return shipment with return document and label to carry only the label of the carrier the customer chose
- changed the return shipment page in the account in the design "Standard" to an open look without frames
- changed booking into the stock to standard products of Shopware only; any other position, such as a set of the set configurator, can only be refunded
- changed labels and credentials to take the shipping address of the primary delivery of an order, without one the first delivery
- changed the configuration into 16 cards in the order of the way of a return shipment, each with a note that links the pages it names, with clearer labels and help texts; no setting is renamed, the remaining settings keep their values
- changed the mail address of the UPS recipient into an optional field
- changed the access of visitors without customer account: they reach return shipments only after the login to the order in the session, headless shops open an order with the new store API route order-login; the link of a return shipment opens only with the details of its own order
- changed the comment of the shop and the private comment of a return shipment into a message to the customer and an internal note; the comment of the customer stays
- changed the mark "restocked" of a position into a checked product booked into the stock
- changed the log of DHL and UPS: no files in var/log any more, with the switch "Log requests" every request and every response is an entry of the event logs of Shopware (settings, system, event logs) in the channel dvsn_return_shipment, with the credentials sent; UPS logs successful label requests with their response as well
- changed the mail to the operator into the flows to the team, sent to the email address of the basic information of the shop or, without one, to every administrator; address, subject and text of the old mail are not taken over
- changed the mail on creation to the customer into a flow; it stays off after the update if the old setting was "no" for all sales channels
- changed the return document of a new installation to start with the settings of the invoice instead of the data of an example company
- removed the storefront templates create/form, details/products, details/document, details/dhl-ups-label (with its folder), details/dhl-ups-store, list/return-shipment-table, index/form, index/lost-order, index/messages and the widgets search-order and order-item, please check your theme if it extends them
- removed the labels stored by earlier versions with the update; a customer creates a new label if needed and the shipment number stays
- removed the values of single sales channels and "only in the storefront" or "only in the administration" of the mail on creation; in the administration the tick "inform the customer by mail" decides
- removed the order search with name and email address or postal code and its setting "activate order search", it showed orders to anybody who guessed name and postal code
- removed the settings "Save label" for DHL and UPS, every label is kept now
- removed the setting "inform customer by email when creating a return shipment" and the settings of the mail to the operator, they are flows and mail templates now; the setting of the attachments stays
- removed the settings of earlier versions from the database on update
- removed the customer/EKP number, procedure and participation number from the DHL credentials, the returns interface of DHL takes only the return recipient
- removed the storefront test routes /dvsn/return-shipment/store-api-test/*, they only answered 204
- removed the switch "allow label creation" of the statuses, the customer gets a label in every status once the return shipment is approved and the label settings allow it
- fixed the credentials for all sales channels being used instead of the credentials of the sales channel of the return shipment
- fixed chargeable labels being created without payment through the label links and the store API
- fixed labels, return shipments and order pages of another customer being reachable for logged in customers
- fixed return shipments, order pages, labels and return documents being reachable without customer account for anybody who knew the address
- fixed a cancelled order of a chargeable label blocking the purchase of a new one
- fixed the chargeable label of a second return shipment in the cart being linked to the first return shipment
- fixed orders being linked to a return shipment without checking the label product and the customer
- fixed the UPS shipment number not being stored
- fixed a new label replacing the stored label of the same carrier
- fixed two windows or a double click booking the stock twice
- fixed two requests at once creating return shipments with more pieces than are open, in the storefront, the store API and the administration
- fixed the filters by payment method, shipping method and shipping country of the list of return shipments
- fixed reinstalling the plugin overwriting changed mail templates
- fixed reinstalling the plugin overwriting the number range of the return shipments and the settings of the return document
- fixed the uninstall switching off the checks of the foreign keys while it drops the tables
- fixed number ranges, documents and mail templates of the plugin getting their texts in only one of two languages with the same ISO code
- fixed the association of a position to its return shipment, it is called returnShipment now
- fixed phpstan errors
- fixed a negative quantity being accepted when a customer creates a return shipment in the storefront
- fixed the store API creating return shipments with more pieces than are open, for orders of another customer and with reasons of another sales channel
- fixed the yes/no selection of the rule "cart contains chargeable label" sitting higher than the fields next to it
- fixed the page and the labels of a return shipment being reachable in another sales channel
- fixed the file name of the return document in the storefront when the number of the return shipment contains a space or an umlaut
- fixed the message on a refused label naming DHL instead of the carrier of the label
- fixed the minimum value of goods of a label for orders with net prices, which took the tax off a second time
- fixed the field of the valid order states in the configuration listing the states of deliveries and payments as well, it shows the four states of an order only
8.8.0 6.7.0.0 - 6.7.16.1
- added a notice on the return dashboard for orders without any returnable product
- changed the return form to lead to the return dashboard when no product can be returned anymore
- fixed chargeable return labels being selectable and returnable in a return shipment
- fixed the product conditions of the app configuration not being checked when submitting a return shipment
- fixed the product exclusion from returns not falling back to the default language
8.7.1 6.7.0.0 - 6.7.16.1
- fixed an error when creating or opening a return shipment if the label period setting was stored by an older version
- fixed an error when creating a DHL or UPS label for a delivery address without postal code or country name
8.7.0 6.7.0.0 - 6.7.16.1
- added an option per return shipment status to allow label creation, enabled by default
- changed the default declined status to disallow labels unless customized
- fixed label creation through previously opened forms for statuses that disallow labels
- fixed errors when rerunning migrations on an existing database
8.6.0 6.7.0.0 - 6.7.16.1
- added a notice with a link to the return shipments on the product page of a chargeable return label
- added app configuration to hide the notice on the product page of a chargeable return label
- fixed a chargeable return label being bought without its return shipment
- fixed a paid chargeable return label staying locked when the customer changed the payment method after a failed payment
8.5.1 6.7.0.0 - 6.7.16.1
- fixed the order total and the payment amount being lower than the line items after buying a chargeable return label
- fixed a promotion silently reducing the price of a chargeable return label
8.5.0 6.7.0.0 - 6.7.16.1
- added app configuration to allow a maximum of one return shipment per order in the storefront
- added app configuration to swap the return shipment number and the order number on the return document
- changed the redirect after a blocked return shipment creation to the dashboard of the order instead of the login form
- fixed missing version id properties within the return shipment entities
8.4.3 6.7.0.0 - 6.7.16.1
- fixed static analysis findings reported by the shopware store code review
- fixed the install and update routines using a default context instead of the plugin install context
8.4.2 6.7.0.0 - 6.7.16.1
- fixed the close button in the customer comment modal showing a raw snippet key
- fixed missing english translations in the DHL and UPS settings, the return shipment detail page and the storefront
8.4.1 6.7.0.0 - 6.7.16.1
- fixed return shipment PDF generation with decorated Shopware document renderers
8.4.0 6.7.0.0 - 6.7.16.1
- added app configuration to restrict return shipment creation by billing and shipping countries
- added storefront validation message for orders outside the configured countries
8.3.3 6.7.0.0 - 6.7.16.1
8.3.2 6.7.0.0 - 6.7.16.1
8.3.1 6.7.0.0 - 6.7.16.1
8.3.0 6.7.0.0 - 6.7.16.1
8.2.0 6.7.0.0 - 6.7.16.1
8.1.7 6.7.0.0 - 6.7.16.1
8.1.6 6.7.0.0 - 6.7.16.1
8.1.5 6.7.0.0 - 6.7.16.1
8.1.4 6.7.0.0 - 6.7.16.1
- fixed paging within administration lists
8.1.3 6.7.0.0 - 6.7.16.1
8.1.2 6.7.0.0 - 6.7.16.1
8.1.1 6.7.0.0 - 6.7.16.1
8.1.0 6.7.0.0 - 6.7.16.1
8.0.0 6.7.0.0 - 6.7.16.1
- refactored dhl and ups credentials
7.4.0 6.6.0.0 - 6.6.10.32
- changed the return form to lead to the return dashboard when no product can be returned anymore
- fixed chargeable return labels being selectable and returnable in a return shipment
- fixed the product exclusion from returns not falling back to the default language
7.3.3 6.6.0.0 - 6.6.10.32
- added app configuration to hide the notice on the product page of a chargeable return label
- fixed a chargeable return label being bought without its return shipment
- fixed a paid chargeable return label staying locked when the customer changed the payment method after a failed payment
7.3.2 6.6.0.0 - 6.6.10.32
- fixed a promotion silently reducing the price of a chargeable return label
7.3.1 6.6.0.0 - 6.6.10.32
- fixed sending chargeable dhl and ups labels as email attachment when creating a return shipment
- fixed duplicate dhl label requests when attaching dhl label and qr code to customer emails
7.3.0 6.6.0.0 - 6.6.10.32
- added storefront validation message for orders outside the configured countries
7.2.0 6.6.0.0 - 6.6.10.32
7.1.2 6.6.0.0 - 6.6.10.32
7.1.1 6.6.0.0 - 6.6.10.32
7.1.0 6.6.0.0 - 6.6.10.32
7.0.2 6.6.0.0 - 6.6.10.32
7.0.1 6.6.0.0 - 6.6.10.32
7.0.0 6.6.0.0 - 6.6.10.32
- removed app configuration for dhl live credentials
- removed app configuration for dhl sandbox credentials
- removed app configuration for ups credentials
- removed app configuration for valid countries for dhl and ups label
- refactored dhl label api
- refactored ups label api
- important upgrade note: the app configuration for dhl credentials has been removed. add all your dhl credentials to the custom app module within the administration settings
- important upgrade note: the app configuration for ups credentials has been removed. add all your ups credentials to the custom app module within the administration settings
6.3.2 6.6.0.0 - 6.6.10.32
6.3.1 6.6.0.0 - 6.6.10.32
6.3.0 6.6.0.0 - 6.6.10.32
- added return shipment number and order number to dashboard and return shipment details
- changed email template for the customer when a new return shipment has been created
- changed default value of the app configuration if the customer should receive an email after a new return shipment has been created
- fixed missing storefront snippets
6.2.2 6.6.0.0 - 6.6.10.32
- changed the tracking number from only the last generated label to a comma separated list of every generated label
6.2.0 6.6.0.0 - 6.6.10.32
6.1.0 6.6.0.0 - 6.6.10.32
6.0.1 6.6.0.0 - 6.6.10.32
6.0.0 6.6.0.0 - 6.6.10.32
- fixed ups label error handling
- changed return shipment creator service interface
5.2.0 6.6.0.0 - 6.6.10.32
5.1.0 6.6.0.0 - 6.6.10.32
5.0.0 6.6.0.0 - 6.6.10.32
- added custom blocks to document template
- added tabs to return shipment details within administration
- added document and label downloads to return shipment details within administration
- added zip code as validation for creating return shipments
- fixed too many results for first page listings within administration
- fixed missing return shipment button on account overview page
- fixed missing order, delivery and payment state within order search
- fixed robots directives
- optimized detail pages for status, procedures and checklist elements within the administration
- added app configuration to notify customer when a new return shipment has been created
- added app configuration to enable/disable hint to print return document before printing a label (enabled by default)
- added app configuration to enable/disable to output api error within storefront if creating a label fails (enabled by default)
- added app configuration to enable/disable order search by number and zip code (disabled by default)
- removed app configuration to disable multiple return shipments per order
- refactored mailer services
4.2.1 6.5.0.0 - 6.5.8.19
4.2.0 6.5.0.0 - 6.5.8.19
4.1.2 6.5.0.0 - 6.5.8.19
4.1.1 6.5.0.0 - 6.5.8.19
- fixed faulty configuration help texts
4.1.0 6.5.0.0 - 6.5.8.19
- changed app configuration for the new sandbox developer portal api
4.0.3 6.5.0.0 - 6.5.8.19
4.0.2 6.5.0.0 - 6.5.8.19
4.0.1 6.5.0.0 - 6.5.8.19
4.0.0 6.5.0.0 - 6.5.8.19
- added functionality to create return shipments within the administration
3.1.1 6.5.0.0 - 6.5.8.19
3.1.0 6.5.0.0 - 6.5.8.19
- changed snippets
3.0.3 6.5.0.0 - 6.5.8.19
3.0.2 6.5.0.0 - 6.5.8.19
- added check for multiple form submit to create a return shipment
3.0.0 6.5.0.0 - 6.5.8.19
2.1.12 6.4.13.0 - 6.4.20.2
2.1.11 6.4.13.0 - 6.4.20.2
2.1.10 6.4.13.0 - 6.4.20.2
2.1.9 6.4.13.0 - 6.4.20.2
2.1.8 6.4.13.0 - 6.4.20.2
2.1.7 6.4.11.0 - 6.4.20.2
- fixed return shipment list for invalid elements with deleted order or customer
2.1.6 6.4.11.0 - 6.4.20.2
2.1.5 6.4.11.0 - 6.4.20.2
2.1.4 6.4.11.0 - 6.4.20.2
2.1.3 6.4.0.0 - 6.4.20.2
- added check for deadline order delivery state
- fixed dhl label sandbox api test
2.1.0 6.4.0.0 - 6.4.20.2
- added app configuration to enable multiple labels per return shipment
- added modal popup when clicking on the label before clicking on the document
- redesigned return shipments details
- renamed label and qrcode columns to dhl_label and dhl_qrcode
2.0.1 6.4.0.0 - 6.4.20.2
2.0.0 6.4.0.0 - 6.4.20.2
- added app module for selectable procedures for every return shipment line item
- moved administration of return shipment line item reasons from app configuration to app module within shopware settings
- added app configuration to select a valid period/date for shipped orders for creating a new return shipment
- added app configuration to select only valid countries for dhl label
- added app configuration to select a procedure-number for dhl label credentials
- added app module to use different dhl label credentials for different countries
- added shipment number to return shipment when creating a dhl label
- added app configuration to define minimum value of return shipment items to create a dhl label
- added product custom field to ban a product from being added to any return shipment
- added ups return shipment labels
- added app configuration to select a valid period/date for shipped orders for creating return labels
- added app module to add configurable return shipment status
- added possibility to search for lost order numbers and/or email addresses
- added notice to return shipment details if a voucher was redeemed in the associated order
- added clickable order number and customer number to return shipment list
- added filter and improved search for return shipment list
- added possibility to increase the stock for returned products directly within the administration of the return shipment
- fixed customer messages on return shipment detail page
- added current status to return shipment detail page
- redesigned creating return shipments
- restructured subscriber, controllers and services
- changed the sender of the notification email to the default shop email address
WICHTIGER HINWEIS - bitte bei einem Update beachten!
- mehrere Rücksendungen pro Bestellung sind nach dem Update automatisch aktiviert. Wenn Sie weiterhin nur eine Rücksendung pro Bestellung erlauben möchten, dann müssen Sie die Plugin Konfiguration entsprechend anpassen
- die Angabe einer gewünschten Vorgehensweise für die einzelnen Produkte von Rücksendungen ist nach dem Update automatisch aktiviert. Wenn Sie die Angabe von Vorgehensweisen deaktivieren möchten, dann müssen Sie die Plugin Konfiguration entsprechend anpassen
- die Gründe wurden aus der Plugin Konfiguration entfernt und können nun im Menüpunkt "Gründe für Rücksendungen" unter "Einstellungen" gepflegt werden. Wenn Sie eigene, individuelle Gründe in der Plugin Konfiguration gepflegt hatten, dann müssen Sie diese erneut im neuen Menüpunkt hinterlegen. Individuelle Gründe aus der Plugin Konfiguration wurden nicht automatisch übernommen
1.1.4 6.4.0.0 - 6.4.20.2
1.1.3 6.4.0.0 - 6.4.20.2
1.1.2 6.4.0.0 - 6.4.20.2
1.1.1 6.4.0.0 - 6.4.20.2
1.1.0 6.4.0.0 - 6.4.20.2
- fixed missing footer payment and shipping logos
- added optional dhl label as qr code
- added shopware 6.4 compatibility
1.0.9 6.3.0.0 - 6.3.5.4
1.0.8 6.3.0.0 - 6.3.5.4
1.0.7 6.3.0.0 - 6.3.5.4
1.0.6 6.2.0 - 6.3.5.4
1.0.5 6.2.0 - 6.3.5.4
1.0.4 6.2.0 - 6.3.5.4
1.0.3 6.2.0 - 6.3.5.4
1.0.2 6.2.0 - 6.2.3
1.0.1 6.2.0 - 6.2.3
- fixed display of customer name
- fixed missing translations